---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE-p3 r346458 NOMADBSD amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(efifb): resolution 1280x1024
Skipping TSC calibration since no legacy devices reported by FADT and CPUID works
CPU: Intel(R) Celeron(R) CPU J3355 @ 2.00GHz (1996.80-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x506c9  Family=0x6  Model=0x5c  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
  Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x1<RDCL_NO>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 3898789888 (3718 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL  EDK2    >
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119 on motherboard
Launching APs: 1
Timecounter "TSC" frequency 1996800000 Hz quality 1000
random: entropy device external interface
kbd0 at kbdmux0
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810f86a0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I > on motherboard
unknown: I/O range not supported
ACPI Error: No handler for Region [ECF2] (0xfffff80003476800) [EmbeddedControl] (20181003/evregion-288)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20181003/exfldio-428)
ACPI Error: Method parse/execution failed \134_SB.PCI0.SBRG.H_EC.BAT0._STA, AE_NOT_EXIST (20181003/psparse-677)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 550
Event timer "HPET1" frequency 19200000 Hz quality 440
Event timer "HPET2" frequency 19200000 Hz quality 440
Event timer "HPET3" frequency 19200000 Hz quality 440
Event timer "HPET4" frequency 19200000 Hz quality 440
Event timer "HPET5" frequency 19200000 Hz quality 440
Event timer "HPET6" frequency 19200000 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x2c> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x91000000-0x91ffffff,0x80000000-0x8fffffff irq 19 at device 2.0 on pci0
vgapci0: Boot video device
pci0: <multimedia> at device 3.0 (no driver attached)
hdac0: <Intel (0x5a98) HDA Controller> mem 0x92318000-0x9231bfff,0x92000000-0x920fffff irq 25 at device 14.0 on pci0
pci0: <simple comms> at device 15.0 (no driver attached)
ahci0: <AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0x9231c000-0x9231dfff,0x92322000-0x923220ff,0x92321000-0x923217ff irq 19 at device 18.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib1: <ACPI PCI-PCI bridge> irq 22 at device 19.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0x92204000-0x92204fff,0x92200000-0x92203fff irq 22 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 84:39:be:19:02:d7
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib2: <ACPI PCI-PCI bridge> irq 23 at device 20.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
xhci0: <Intel Apollo Lake USB 3.0 controller> mem 0x92300000-0x9230ffff irq 17 at device 21.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
sdhci_pci0: <Intel Apollo Lake eMMC 5.0 Controller> mem 0x92320000-0x92320fff,0x9231f000-0x9231ffff irq 39 at device 28.0 on pci0
sdhci_pci0: 1 slot(s) allocated
mmc0: <MMC/SD bus> on sdhci_pci0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC269 (Right Analog)> at nid 21 and 24 on hdaa0
pcm1: <Realtek ALC269 (Lid-In Analog Mic)> at nid 18 on hdaa0
hdacc1: <Intel (0x280a) HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel (0x280a) Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel (0x280a) (HDMI/DP 8ch)> at nid 3 on hdaa1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
ada0: <CT120BX500SSD1 M6CR013> ACS-3 ATA SATA 3.x device
ada0: Serial Number 1830E15059EF
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
mmcsd0: 63GB <MMCHC S0J38Y 1.0 SN 003C03C8 MFG 10/2017 by 19 0x004e> at mmc0 200.0MHz/8bit/8192-block
mmcsd0boot0: 4MB partion 1 (read-only) at mmcsd0
mmcsd0boot1: 4MB partion 2 (read-only) at mmcsd0
mmcsd0rpmb: 4MB partion 3 at mmcsd0
Trying to mount root from ufs:/dev/gpt/nomadroot [rw,noatime]...
Root mount waiting for: usbus0
uhub0: 15 ports with 15 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <Generic USB2.0-CRW> at usbus0
ugen0.3: <Chicony Generic USB Hub> at usbus0
uhub1 on uhub0
uhub1: <Chicony Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2> on usbus0
Root mount waiting for: usbus0
uhub1: 3 ports with 2 removable, bus powered
Root mount waiting for: usbus0
ugen0.4: <Chicony PFU-65 USB Keyboard> at usbus0
ukbd0 on uhub1
ukbd0: <Chicony PFU-65 USB Keyboard, class 0/0, rev 1.10/1.00, addr 3> on usbus0
kbd1 at ukbd0
ugen0.5: <KYE BUFFALO Optical Combo Mouse> at usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usb_alloc_device: set address 6 failed (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=6, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_TIMEOUT
ugen0.6: <Unknown > at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
Root mount waiting for: usbus0
ugen0.6: <SMI Corporation USB DISK> at usbus0
umass0 on uhub0
umass0: <SMI Corporation USB DISK, class 0/0, rev 3.00/11.00, addr 6> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <SMI USB DISK 1100> Removable Direct Access SPC-4 SCSI device
da0: Serial Number AAS60LE31GLII5K0
da0: 400.000MB/s transfers
da0: 15100MB (30924800 512 byte sectors)
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
ugen0.7: <ASIX Elec. Corp. AX88179> at usbus0
WARNING: /: TRIM flag on fs but disk does not support TRIM
WARNING: /home: TRIM flag on fs but disk does not support TRIM
acpi_video0: <ACPI video extension> on vgapci0
Cuse v0.1.35 @ /dev/cuse
re0: link state changed to UP
lo0: link state changed to UP
re0: link state changed to DOWN
iwm0: <Intel(R) Dual Band Wireless AC 3165> mem 0x92100000-0x92101fff irq 23 at device 0.0 on pci2
iwm0: hw rev 0x210, fw ver 22.361476.0, address dc:8b:28:9a:3d:af
ums0 on uhub1
ums0: <KYE BUFFALO Optical Combo Mouse, class 0/0, rev 1.10/0.00, addr 4> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
axge0 on uhub0
axge0: <NetworkInterface> on usbus0
miibus1: <MII bus> on axge0
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 3 on miibus1
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
ue0: <USB Ethernet> on axge0
ue0: Ethernet address: 74:03:bd:7f:14:70
re0: link state changed to UP
ue0: link state changed to DOWN
Security policy loaded: MAC/ntpd (mac_ntpd)
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
GEOM_SCHED: Initializing global data.
GEOM_SCHED: Loading: mp = 0xffffffff82e77560, g_sched_class = 0xffffffff82e77560.
GEOM_SCHED: Modevent 0.
GEOM_SCHED: Loaded module rr error 0.
GEOM_SCHED: Device da0.sched. created.